Product manual

Page 21For technical questions, please call 1-800-444-3353.Item 61229
SAFETYOPERATIONNETWORK SETTINGS
System Information
System > Version
View and Set Device Information.
Figure S
1. Device Name: Set Device Name
(up to 21 characters).
2. Device ID: Set Device ID number (up to 6 numbers
3. Device Type: Cannot modify.
4. Hardware Ver: Cannot modify.
5. Software Ver: Cannot modify.
6. IE Client Ver: Cannot modify.
7. MAC Add: Media Access Control address.
MAC Address needs to be changed when
multiple DVRs are on the same network.
Changes will not be saved unless
you click Apply then OK!
Click Exit to return to System and
discard unsaved changes.
Display Settings
Display > Live
Set how Camera information will display.
Figure T
1. Channel: Select Channel.
2. Name: Set Channel name (up to 8 characters).
3. Position: Select position where Channel
Name will appear on the screen.
a. U-L: Upper Left
b. D-L: Lower Left.
c. U-R: Upper Right.
d. D-R: Lower Right.
e. Close: No name will appear.
4. Color: Click Setup to adjust Hue,
Brightness, Contrast, and Saturation.
Changes will not be saved unless
you click Apply then OK!
Click Exit to return to System and
discard unsaved changes.
5. Covert: Enable to conceal live image.
6. Show Time: Toggles date and time display.
7. Record Time: Enable to record date and time.
Changes will not be saved unless
you click Apply then OK!
Click Exit to return to System and
discard unsaved changes.
8. Copy: Copy parameters from one
Channel to other Channels.
a. Select Channel to copy from.
b. Select Channel to copy to or select ALL.
c. Click Copy, then click OK.
Changes will not be saved unless
you click Apply then OK!
Click Exit to return to System and
discard unsaved changes.