Product manual
Page 20 For technical questions, please call 1-800-444-3353. Item 61229
SAFETY OPERATION NETWORKSETTINGS
Users
System > Users
The system supports one administrator and
six users. The administrator has permission
to perform all activities and is authorized to
set up permissions for all other users.
Figure P
Set up Administrator
1. Select admin and click Edit.
2. User Name: Set User Name (up to 8 characters).
3. Password Enable: Select Enable or Disable.
Note: When Password is Enabled, a key
icon will appear on Pop-Up Menu. Click
on key to enable Menu Lock.
a. Password: Enter Password
(must be 6 numbers).
b. Confirm: Enter Password again to confirm.
Changes will not be saved unless
you click Apply then OK!
Click Exit to return to System and
discard unsaved changes.
Set up additional Users
4. Select user1 then click Edit.
5. User Enable: Select Enable.
6. User Name: Enter User Name (up to 8 characters).
7. Password Enable: Select Enable or Disable.
a. Password: Enter Password
(must be 6 numbers).
b. Confirm: Enter Password again to confirm.
Changes will not be saved unless
you click Apply then OK!
Click Exit to return to System and
discard unsaved changes.
8. Select User that was just named
and click Permission.
a. Click in boxes to select specific permissions.
b. Click All to select all permissions.
c. Click Clear to remove all permissions.
Figure Q
Log Search Check entire system log
Parameter Set all parameters
Maintain
Update version, recover factory
presets, reboot and shut down
Disk Manage
Manage Hard Drives,
including deleting data
Remote Login Log in remotely
Rotate Control Manage Sequence
Manual
Record
Manually start and stop recording
Backup
Backup recordings of
selected channels
Live
View live images of
selected channels
Playback
Playback recordings of
select channels
PTZ Control
Perform PTZ operation
(PTZ camera sold separately)
Figure R
Changes will not be saved unless
you click Apply then OK!
Click Exit to return to System and
discard unsaved changes.
9. Repeat steps above for other Users.
Changes will not be saved unless
you click Apply then OK!
Click Exit to return to System and
discard unsaved changes.