Product manual

Page 18 For technical questions, please call 1-800-444-3353. Item 61229
SAFETY OPERATION NETWORKSETTINGS
Set Recording Mode
3
Recording Schedule
Record > Schedule
Figure N
1. Channel: Select Channel.
2. Week: Select day of week.
3. Schedule Table:
a. 00 - 23 represent 24 hours of the day.
b. Two rows of boxes below represent
corresponding hours.
• Top row: When selected, boxes will
turn green to indicate Normal continuous
recording. This is the Default setting.
• Bottom row: When selected, boxes
will turn yellow to indicate recording will
be triggered by Motion Detection.
c. Copy (Date): Copy parameters
from one Day to other Days.
d. Select Day to copy from.
e. Select Day to copy to or select ALL.
f. Click Copy, then click OK.
4. Copy (Channel): Copy parameters from
one Channel to other Channels.
a. Select Channel to copy from.
b. Select Channel to copy to or select ALL.
c. Click Copy, then click OK.
Changes will not be saved unless
you click Apply then OK!
Click Exit to return to System and
discard unsaved changes.