Product manual

Page 11For technical questions, please call 1-800-444-3353.Item 61229
SAFETYOPERATIONNETWORK SETTINGS
FOR ADVANCED USERS
Internet Setup for Remote Use
Wide Area Network (WAN) Setup
PORT FORWARDING
SMARTPHONE
ACCESS
@
REMOTE
COMPUTER
ACCESS
Set up LAN
according to
instructions above.
Log in to the Router
and go to
Port Forwarding or
Applications and
Gaming.
Set start port to 3000
and end port to 3002.
Set up both UDP and
TCP protocols if the
option is given.
Open Internet Explorer®.
In address bar, type in
Default Gateway
(from LAN Setup above).
Example: xxx.xxx.xxx.xxx
Press Enter.
Find the Router’s IP
Address by going to
whatsmyip.com.
Write it down.
On remote computer,
Open Internet Explorer®. In address bar,
type in Router’s IP Address
and HTTP Port (from LAN Setup above):
http://xx.xxx.xxx.xxx:3001
(where x = IP Address and 3001 = HTTP Port)
Press Enter.
Allow ActiveX Control to install.
You may need to adjust the settings
in Internet Explorer® by adding the
http address to Trusted Sites and
modifying ActiveX controls to allow
installation.
After ActiveX Control installs,
Log in to DVR
with User Name and Password
(from LAN Setup above).
Insert supplied CD
into computer and look in
Mobile Software
folder for instructions.
In DVR
Main Menu
Select Network
then Mobile
Set User Name
and Password
Set Mobile Port
to 3002
Click Apply
then OK
See Page 30