Product manual

Page 3
For technical questions, please call 1-800-444-3353.
Item 61238
Assembly Instructions
Read the
ENTIRE
IMPORTANT SAFETY INFORMATION
section at the
beginning of this document including all text under subheadings therein
before set up or use of this product.
Post (5)
Rear Beam
(22)
Bolt (20)
Spring
Washer (21)
Middle
Beam (14)
Figure
A:
Attach Post to Middle Beam
1.
Insert Middle
Beam (14) into the
receiver at the base of the
Post (5).
Align hole in Rear Beam (22) with hole
at base of Post and attach with Bolt (20)
and Spring Washer (21) as shown.
Caster (18)
Axle
Wheel (13)
Washer (12)
Snap Ring (11)
Nut (15),
Spring Washer
(16), Washer (17)
Bolt (19)
Middle
Beam (14)
(16), Washer (17)
Figure
B:
Attach Wheels and Casters
2.
Attach Caster
(18) to the Middle
Beam
(14) using one Bolt (19), Washer
(17),
Spring
Washer
(16), and Nut
(15).
3.
Slide a Wheel
(13) onto each axle
at end of the Rear
Beam
(22).
Then slide on a Washer (12)
and
secure
with a Snap
Ring
(11).