Product manual

ManualsBrandsHarbor Freight Tools ManualsAuto BodyHarbor Freight Tools 7 Pc Hydraulic Auto Body/Frame Repair Kit

Page 5For technical questions, please call 1-800-444-3353.Item 60726

Operation Instructions

Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the

beginning of this document including all text under subheadings therein

before set up or use of this product.

Note: In most cases, the Push and Pull Hydraulic Rams in this Kit will only be capable of

returning vehicle body and frame parts to their approximate, original position.

Additional work may be required to completely repair the vehicle part.

Pushing

1. Use the larger Push Rams where

greater force is needed and where

there is sufficient room to operate.

2. Use the smaller Push Rams

where less force is required.

Note: The Push Rams require a solid,

non-movable base directly across from the

damaged area and in line with the direction

the damaged area needs to be bent.

3. When positioning the Push Ram,

place a block of wood or other material

behind the base of the Push Ram

and on the side that is to be bent for

protection and to spread the Push Ram

pressure over a greater area.

CONNECT TO HYDRAULIC PUMP HOSE

(NOT INCLUDED)

HERE

NON-MOVABLE

AREA

DAMAGED

AREA

WOOD

BLOCK

WOOD

BLOCK

HYDRAULIC PUSH RAM

Pulling

1. Use the larger Pull Ram where

greater force is needed and where

there is sufficient room to operate.

2. Use the smaller Pull Ram where

less force is required.

Note: The Hydraulic Pull Rams may be

used in either horizontal or vertical positions.

The Hooks will turn to accept

hooking from different angles.

3. Hook one end of the Pull Ram

to the object to be moved and

the other end of the Pull Ram to

a stable, unmovable base.

4. A chain or strap may be used on either

end to provide a hooking surface.

Make sure the chain or strap is rated

to support the pulling weight.

HOOK

TO CHAIN

OR STRAP