Product manual

SKU 92020 For technical questions, please call 1-888-866-5797. Page 7
NOTE: No replacement parts are available for this tool.
Battery/Fuse Replacement
To replace the battery or fuse:
1. Remove the Test Leads from the multimeter.
2. Turn the unit over.
3. Remove both screws using a Philips screwdriver.
4. Remove back cover.
5. Pull battery/fuse out of unit and replace with the same.
(9V battery or .5 A/250V fuse)
6. Replace cover and retighten screws.
Maintenance
1. Wipe unit with a slightly damp cloth using a light detergent. Do not use
solvents or abrasives.
2. Remove battery if not in use for long periods.
3. Store unit in a dry location.
4. Other than the battery and fuse, there are no replaceable parts on this unit.
Repairsshouldbedonebyaqualiedtechnician.
2. Plug the red Test Lead into the V
ΩmA(Center)Jack.PlugtheblackTest
LeadintotheCom(Bottom)Jack.SwitchtheMultimeterON.
3. Connect the red probe to the positive terminal of the battery and the black
to the negative terminal.
4. The battery amperage under a load of 370 mΩ will be displayed to a
resolution of .1mA.
5. Normal amperage: For a standard 9V (6LR61) battery = 25 mA
For a 1.5 V “AA” (LR6) battery = 4 mA
Backlight
Illuminate the display to make it easier to read.
1. Switch the Multimeter ON. Press the Backlight button.
2. The backlight will turn off automatically.
REV 05c; 07g