Product manual

SKU 92020 For technical questions, please call 1-888-866-5797. Page 4
Unpacking
When unpacking, make sure the following parts are included: Digital
Multimeter, and black and red Test Leads. If any parts are missing or broken, please
call Harbor Freight Tools at the number on the cover of this manual. If any part of
the machine is missing or broken, please call Harbor Freight Tools at the number
on the front cover as soon as possible.
warning labels on prescriptions to determine if your judgment or
reexesareimpairedwhiletakingdrugs.Ifthereisanydoubt,donot
operate the tool.
17. We recommend that only a licensed electrician work on high-voltage
or other potentially dangerous circuits.
Note: Performance of this tool may vary depending on condition of internal
battery.
Warning: The warnings, cautions, and instructions discussed
in this instruction manual cannot cover all possible
conditions and situations that may occur. It must be
understood by the operator that common sense and
caution are factors which cannot be built into this
product, but must be supplied by the operator.
Warning: This product contains or produces chemicals,
including lead, known to the State of California to
cause cancer and birth defects (or other reproductive
harm). (California Health & Safety Code 25249.5 et
seq.)
Operation
WARNING: ELECTRICAL SHOCK CAN CAUSE DEATH OR
INJURY. AVOID TOUCHING EXPOSED CONDUCTORS
OF ELECTRICITY.
Additional Multimeter Precautions
1. Do not test voltage on AC circuits higher than 750 volts.
2. Do not test voltage on DC circuits higher than 1000 volts.
3. Do not test current on circuits higher than 10 amps.
4. Be careful not to apply voltage to the Test Leads when they are
connectedtotheCOM(Bottom)andVΩmA(Center)Jacksandthe
Multimeter is in an Ohms testing setting. Damage can occur to the
multimeter or the fuse may blow.
5. Do not switch between testing modes with the multimeter connected
to a circuit.