Product manual

Page 10 For technical questions, please call 1-800-444-3353. Item 69064
Specifications
Electrical Rating 120V~ / 60Hz / 12A
Motor No Load Speed 5500 RPM
Maximum Blade Diameter 7-1/4"
Arbor 5/8"
Depth of Cut
2-7/16" @ 90°
1-5/8" @ 45°
Bevel Capacity 0° to 45°
4005982
LASER LIGHT
DO NOT STARE INTO BEAM
Max. Output: <1 mW,
Wavelength: 650 nm
CLASS II LASER PRODUCT
This product complies with
21 CFR 1040.10 and 1040.11
Diode Mfr.: Yueqing Dongke Electron Co.,
LTD Xiaxue Industry Area, Shifan Town
Yueqing, Zhejiang 325608 P.R.China
Manufacture Date: ___________, ______
Caution: Use of controls or adjustments or
performance of procedures other than those specified
herein may result in hazardous radiation exposure.
Caution: The use of optical instruments
with this product will increase eye hazard.
Setup - Before Use:
Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this
manual including all text under subheadings therein before set up or use of this product.
Note: For additional information regarding the parts listed in the following
pages, refer to Parts List and Diagram on page 14.
Functions
Spindle Lock Lever (14)
Lower Guard (42)
Trigger Lock
Depth
Lever (62)
Depth
Gauge (68)
Angle Gauge
Trigger (18)
Auxiliary Handle
Main Handle
Page 10
For technical questions, please call 1-800-444-3353.
Angle Gauge
Figure 1
Stationary Guard (34)
Power ON Light (8)
Dust Outlet
Angle Lock Knob (79)
Laser Switch (7)
Fence Lock Knob (77)
Rip Fence (66)
Base (70)
Outer Flange (36)
Blade Bolt (35)
Saw Blade
(Sold separately)
Lower
Guard
Lever (41)
Laser (73)
SAFETY OPERATION MAINTENANCESETUP