User Guide

Page 14 For technical questions, please call 1‑800‑444‑3353. SKU 68024
5. If the tool requires more force to
accomplish the task, verify that the
tool receives sufcient, unobstructed
airow (CFM) and increase the pressure
(PSI) output of the regulator up to the
maximum air pressure rating of this tool.
CAUTION! TO PREVENT TOOL AND
ACCESSORY FAILURE, RESULTING
IN INJURY: Do not exceed the tool’s
maximum air pressure rating.
If the tool still does not have sufcient
force at maximum pressure and
sufcient airow, then a larger tool may
be required.
Note: While working on roofs, tar and
dirt may build up on the Nose of the
Roong Nailer. This can prevent normal
operation. Remove buildup with a
nonammable solvent. NEVER use
gasoline or other ammable solvents.
Do not immerse the Roong Nailer in
an approved solvent beyond the height
of the nail heads, to avoid getting the
solvent into the drive cylinder of the
tool. Dry off the Roong Nailer before
use; any oil lm left after cleanup will
accelerate tar buildup.
6. After use, to prevent accidents:
a. Release the trigger.
b. Detach the air supply.
c. Attempt to re the Tool into a piece
of scrap wood to ensure that it is
incapable of ring any fasteners.
d. Release the trigger again.
e. Clean external surfaces with clean,
dry cloth.
f. Store indoors out of children’s reach.