65785 JUMBO UNIVERSAL REMOTE CONTROL Instructions and precautions Visit our website at: http://www.harborfreight.com Save these instructions. Read all precautions and instructions. Copyright© 2008 by Harbor Freight Tools®. All rights reserved. No portion of this document or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools. Diagrams within this document may not be drawn proportionally.
Specifications Batteries Required (2) AA 1.5V Batteries Dimensions 11” L x 5” W x 3/4” Thick Unpacking When unpacking, make sure the item is intact and undamaged. If any parts are missing or broken, call Harbor Freight Tools at the number shown on the cover of this document. INTRODUCTION 1 2 3 The Jumbo Universal remote control can operate up to eight types on devices, includeing; TV, VCR, DVD, Satallite. You may need the remote. Important SAFETY Information Use Precautions 1.
BUTTON functions CODE SEARCH: Used to program the remote or to search through codes. LED INDICATOR LIGHT: The LED flashes to show that the remote is working properly. Please note: The LED Indicator Light will activate whenever a button is pressed and will deactivate when the button is released. The LED Indicator light will also blink when codes are entered into the Remote. ON/OFF BUTTON: Operates the same as your original remote.
For TV Only (Direct . Entry) Continued 2. 7. Manually turn on the unit to be controlled. 8. Press and hold the Code Search Button until the LED stays on. Release the Code Search Button. 9. Point the Remote at the unit and press the Power Button until the unit turns off. 10. If the unit does not turn off, press the Channel Up Button repeatedly until the unit changes the channel. 11. Once the unit is fully functional, press and release the Mute Button (4) to save and program the code. 12.
Remote is in TV mode, you must change the mode to operate other devices like DVD, VCR, satellite receiver or cable box. For example, if the Remote is in VCR mode and you wish to turn off the TV, first press the TV key before pressing the Power Button. AUTO CODE SEARCH 1. If your device does not respond after you have tried all the codes for your brand, or if your brand is not listed, try searching for your brand this way: 2. Manually turn on the unit to be controlled. 3.
3. Press and hold the Sleep Button for five seconds. The LED light will turn on. 4. Release the Sleep Button. 5. Using the number keys, enter the desired time in minutes (from 1 to 99). To set the Timer to time that is under ten minutes, press “0” and then the desired number (“05” for five minutes.) The LED light will blink with each pressed key. 6. Once the second number is entered, the LED turns off and the Sleep Timer is not set. 7.
TV CODES SKU 65785 For technical questions, please call 1-800-444-3353.
TV CODES CONTINUED SKU 65785 For technical questions, please call 1-800-444-3353.
VCR CODES SKU 65785 For technical questions, please call 1-800-444-3353.
VCR CODES CONTINUED LASER DISC CODES SKU 65785 For technical questions, please call 1-800-444-3353.
DVD CODES CONTINUED SKU 65785 For technical questions, please call 1-800-444-3353.
CABLE CODES SKU 65785 For technical questions, please call 1-800-444-3353.
SATALITE CODES DVD/VCR COMBO SYSTEM CODES TV/VCR COMBO PAIRS CODES SKU 65785 For technical questions, please call 1-800-444-3353.
