Product manual

Page 5SKU 95826 For technical questions, please call 1-800-444-3353.
Never lay the Air Scraper down until it has come to a complete stop. 6. Moving
parts can grab the surface and pull the tool out of your control.
Do not allow children near this product. 7. When tool is not in use, store in a
location that is out of reach of children.
Never leave the Air Scraper unattended when it is plugged into an air supply. 8.
Turn off the tool, and unplug it from its air supply before leaving.
Make sure the Air Scraper is unplugged from its air supply before making any 9.
adjustments or service.
WARNING! Some dust created by power sanding, sawing, grinding, drilling, and
other construction activities, contains chemicals known [to the State of California]
to cause cancer, birth defects or other reproductive harm. Some examples of these
chemicals are:
Lead from lead-based paints
Crystalline silica from bricks and cement or other masonry products
Arsenic and chromium from chemically treated lumber
Your risk from these exposures varies, depending on how often you do this type
of work. To reduce your exposure to these chemicals: work in a well ventilated
area, and work with approved safety equipment, such as those dust masks that
are specially designed to lter out microscopic particles. (California Health & Safety
Code § 25249.5, et seq.)
WARNING! The brass components of this product contain lead, a chemical known to
the state of California to cause birth defects (or other reproductive harm). (California
Health & Safety code § 25249.5, et seq.)
UNPACKING
When unpacking, check to make sure that the item is intact and undamaged. If any
parts are missing or broken, please call Harbor Freight Tools at the number shown
on the cover of this manual as soon as possible.
ASSEMBLY INSTRUCTIONS
NOTE: For additional information regarding the parts listed in the following pages,
refer to the Assembly Diagram near the end of this manual.
NOTE: The Air Scraper comes with one Scraper Blade (17) attached. If this is not the
blade you choose to work with, follow these directions to change Scraper Blades.