Product manual

Item 61750 For technical questions, please call 1-888-866-5797. Page 13
To Adjust The Angle Of The Miter Gauge:
1. The angle of the Miter Gauge (39) may be adjusted to the right 0 to 45 Degrees
and to the left 0 to 45 Degrees. (See Figure K, next page.)
2. To adjust the angle of the Miter Gauge (39), slightly loosen the Miter Gauge
Knob (38). (See Figure K.)
3. Observe the Angle Scale on the Miter Gauge (39). Then move the Miter Gauge
Body to the right or left until the desired angle of the Miter Gauge is shown on the
Angle Scale. (See Figure K.)
4. Once the desired angle of the Miter Gauge (39) is obtained, retighten the Miter
Gauge Knob. (See Figure K.)
MITER GAUGE (39)
MITER GAUGE KNOB (38)
ANGLE SCALE
FIGURE K
TABLE (41)
KNOB
(45)
KNOB
(45)
TABLE (41)
ANGLE
GAUGE
(42)
ANGLE
GAUGE
(42)
FIGURE J