Product manual

Item 6852 For technical questions, please call 1-888-866-5797. PAGE 2
PRODUCT SPECIFICATIONS
WARNING SYMBOLS AND DEFINITIONS
This is the safety alert symbol. It is used to alert you to
potential personal injury hazards. Obey all safety messages
that follow this symbol to avoid possible injury or death.
Indicates a hazardous situation which, if not avoided,
will result in death or serious injury.
Indicates a hazardous situation which, if not avoided,
could result in death or serious injury.
Indicates a hazardous situation which, if not avoided,
could result in minor or moderate injury.
Addresses practices not related to personal injury.
REV 07g
Electrical Requirements 1 HP, Ball Bearing Motor
110 Volt / 60 Hz / 12.8 Amps
3450 Rpm
Overall Height 40"
Table Surface Dimensions 6-1/2" x 12-3/4"
Table Tilt 0-50 Degrees
Work Table Options For Sanding Disc or Sanding Belt
Use
Belt Size 6" x 48"
Disc Size 9" Diameter, PSA Type
Belt Speed 1400 FPM
Disk Speed 1800 RPM
Weight 121 lb.