Product manual

Item 6852 For technical questions, please call 1-888-866-5797. PAGE 13

REV 04b

TABLE (1)

KNOB

(10)

KNOB

(10)

TABLE (1)

ANGLE

GAUGE

(5)

ANGLE

GAUGE

(5)

FIGURE J

To Adjust The Angle Of The Miter Gauge:

1. The angle of the Miter Gauge (3) may be adjusted to the right 0 to 45 Degrees

and to the left 0 to 45 Degrees. (See Figure K, next page.)

2. To adjust the angle of the Miter Gauge (3), slightly loosen the Miter Gauge Knob.

(See Figure K.)

3. Observe the Angle Scale on the Miter Gauge (3). Then move the Miter Gauge

Body to the right or left until the desired angle of the Miter Gauge is shown on the

Angle Scale. (See Figure K.)

4. Once the desired angle of the Miter Gauge (3) is obtained, retighten the Miter

Gauge Knob. (See Figure K.)

MITER GAUGE

(3)

MITER GAUGE KNOB

ANGLE SCALE

FIGURE K