Product manual

Page 3For technical questions, please call 1-888-866-5797.Item 68304
Instructions
1. Push the OFF ON button, or move the
jaws to automatically turn caliper on.
2. To toggle measurement between inches
and millimeters, press in/mm button.
3. With jaws closed, press ZERO to set
readout to 0. The caliper features
last measurement memory. When
the unit is turned on, the most recent
measurement will be displayed.
4. To measure outside of object,
set the bottom prongs outside
object being measured. Slide the jaws
together until they gently contact the item.
5. To measure inside of object, set the
top prongs inside object being measured.
Spread prongs apart until they
touch surface of object.
6. When finished, press OFF ON to
turn off caliper. The unit will also
automatically shut off if left idle.
7. To replace battery, open battery
compartment to right of display, install
new SR44 battery positive (flat) side up,
and slide Battery Cover back into place.
Note: Replacement parts are not available.
inch/F
OFF
ON
ZERO
mm
OFF
ON
ZERO
inch/F
OFF
ON
ZERO
mm
OFF
ON
ZERO
Outside Measurement Inside Measurement
inch/F
OFF
ON
ZERO
mm
OFF
ON
ZERO
in/mm
OFF
ON
ZERO
mm
in/mm
OFF
ON
ZERO
mm
Depth Measurement Step Measurement