Specifications Scale Units Accuracy Measuring Capabilities Scale Type Inches ±0.001" Inside / Outside / Depth / Step Mechanical Dial Important Safety Information 1. This product is not a toy. Do not allow children to play with or near this item. 2. Wear ANSI-approved safety goggles during use. 3. Keep work area clean and well lit. 4. Do not operate when tired or when under the influence of alcohol, drugs or medication. Page 2 5. Use as intended only. 6.
Operating Instructions Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this document including all text under subheadings therein before set up or use of this product. 1. Make sure upper and lower Outside Diameter Jaw (2) faces are clean. See Figure A. 5. To adjust (if needed), loosen the Dial Adjustment Lock (3) by turning it counterclockwise. 2. Loosen Slide Scale Lock (6) by turning it counterclockwise. 6.
11. To use the Caliper to measure the outside diameter of an object, close the Outside Diameter Jaws over the object, making sure that the item rests squarely on the Jaws. See Figure C, below. Figure C 12. To use the Caliper to measure the inside diameter of an object, see Figure D, below. Figure D Page 4 For technical questions, please call 1-888-866-5797.
13. To make a depth measurement of an object, see Figure E. To measure the step of an object, see Figure F. Figure E Figure F PLEASE READ THE FOLLOWING CAREFULLY THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM IN THIS DOCUMENT AS A REFERENCE TOOL ONLY.
Parts List and Diagram 9 8 Part 1 2 3 4 5 6 7 8 9 10 Description Thumb Roll Outside Diameter Jaws Dial Adjustment Lock Dial Adjustment Dial Slide Scale Lock Sliding Index Edge Inside Diameter Jaws Step Measuring Surface Depth Measuring Blade 5 6 Qty. 1 2 1 1 1 1 1 2 1 1 10 4 7 1 3 2 Page 6 For technical questions, please call 1-888-866-5797.
Record Product’s Serial Number Here: Note: If product has no serial number, record month and year of purchase instead. Note: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. Item 62362 For technical questions, please call 1-888-866-5797.
3491 Mission Oaks Blvd.
