Product manual

Page 8 For technical questions, please call 1-800-444-3353. SKU 32997
Cross Sliding the Vise
Determine the position of the Vise that will give you the safest and
best access to the material clamped in the SLIDE (24).
Step 1: To adjust the longitudinal (fore/aft) axis of the Vise, locate
the LEAD SCREW (8) and HANDLE (1).
Step 2: Turn the HANDLE (1) counterclockwise to move the MID-BASE (18) and UPPER
BASE (20) further towards the rear of the BASE (9) as shown in Figure 5.
Lead screw
(# 8 )
and
H andle
(# 1 )
Lead screw
(#12)
and
H andle
(# 1 )
B ase
(# 9 )
U pper Base
(#20)
M id -B a s e
(#18)
(8)
(1)
(18)
(1)
(12)
(20)
(9)
Screw
Figure 5 -- Moving Mid Base and Upper Base
Step 3: Turn the HANDLE (1) clockwise to move the MID and UPPER BASE
(18 & 20) closer to the HANDLE (1). Position for best access.
Step 4: To adjust the cross travel (side to side) axis of the Vise,
locate the LEAD SCREW (12) and HANDLE (1).