Product manual

Page 5For technical questions, please call 1-800-444-3353.SKU 32997
Attaching the Vise to a T-Slot Table
Step 1: You will need additional hardware (sold separately) to complete installation.
Step 2: Place the assembled Vise onto the T-Slot Table. Select the appropriate rows in the
T-Slot Table which line up with the Mounting Tabs on the BASE (9).
Step 3: Insert 2 to 6 T-Slot mounting bolts into the T-Slot Table rails.
Step 4: Place the Vise on the T-Slot Table in the position you want. Make sure the mounting
tabs on the BASE (9) line up with the mounting bolts as shown in Figure 2.
Figure 2 -- Attaching Base to Table
Step 5: Thread nuts on the mounting bolts and tighten by hand.
Step 6: Position the Vise a nal time. Tighten the mounting nuts rmly.
B ase
(#09)
M ounting Tabs
M ounting Bolts
(9)