Product manual

Page 4 For technical questions, please call 1-800-444-3353. SKU 32997

ASSEMBLY

Your Vise comes partially assembled. To complete assembly you will need a 14mm wrench.

Step 1: Place the Vise on a clear area of your workbench.

Step 2: Slide a HANDLE (1) onto the LEAD SCREW (8), rotating the HANDLE (1) until it ts

onto the square end of the LEAD SCREW (12) as shown in Figure 1.

H andle (#01)

N ut (#02)

H andle (#01)

N ut (#02)

Lead Screw (#08)

Vice A ssem bly

(8)

(12)

(2)

(1)

(2)

(1)

Vise Assembly

Figure 1 -- Handle Assembly

Step 3: Attach a NUT (2) and tighten with a 14mm wrench.

Step 4: Locate the other HANDLE (1) and slide it onto the LEAD SCREW (12).

Step 5: Attach a NUT (2) and tighten with a 14mm wrench.