Product manual

Page 2 For technical questions, please call 1-800-444-3353. SKU 32997
SPECIFICATIONS
Cross Travel 7-1/4 IN.
Overall Height 6-1/8 IN.
Maximum Jaw Opening 5-3/4 IN.
Longitudinal Travel 7-1/2 IN.
Jaw Depth 1-1/4 IN.
SAVE THIS MANUAL
READ ALL INSTRUCTIONS BEFORE ASSEMBLING OR OPERATING THE CROSS SLIDE VISE.
You will need this manual for the safety instructions, operating instructions,
and parts list. Put it in a safe, dry place for future reference. Keep your invoice
with this manual. Write the invoice number on the inside front cover.
SAFETY WARNINGS & CAUTIONS
WARNING: When using electric tools, machines or equipment, basic safety precautions
should always be followed to reduce the risk of re, electric shock, and personal injury.
READ ALL INSTRUCTIONS BEFORE USING THIS TOOL
1. KEEP WORK AREA CLEAN. Cluttered areas invite injuries.
2. CONSIDER WORK AREA CONDITIONS. Don't use in damp, wet, or
poorly lit locations. Don't expose to rain. Keep work area well lit.
3. KEEP CHILDREN AWAY. All children should be kept away from
the work area. Don't let them handle machine.
4. STORE IDLE EQUIPMENT. When not in use, tools should be locked up in a dry
location to inhibit rust. If possible, store in an area out of reach of children.
5. DO NOT FORCE THE MACHINE OR TOOL. It will do the job better
and more safely at the rate for which it was intended.
6. USE THE RIGHT TOOL. Don't force a small tool or attachment to do the work of a
larger industrial tool. Don't use a tool for a purpose for which it was not intended.
7. DRESS PROPERLY. Don't wear loose clothing or jewelry. They can be caught in moving
parts. Protective gloves and non-skid footwear are recommended when working. Wear
restrictive hair covering to contain long hair, preventing it from getting caught in machinery.
8. USE EYE AND EAR PROTECTION. Use a full face mask if the work you are
doing produces metal lings, dust or wood chips. Goggles are acceptable in other
situations. Wear a clean dust mask if the work creates a lot of ne or coarse
dust. When operating for extended periods of time, use approved ear protection.
Safety goggles and ear protectors are available from Harbor Freight Tools.
9. SECURE WORK. Use clamps or a vise to hold the work if possible. It's safer
than using your hands and it frees both hands to operate the tool.
REV 11f