Product manual

Page 10 For technical questions, please call 1-800-444-3353. SKU 32997
Locking the Vise
Your Vise BASES can be locked into position to prevent accidental movement.
You will need a 10mm end wrench and a Phillips screwdriver for this operation.
Step 1: Select which BASE (9) you want you lock into position.
Step 2: Loosen the two NUTS (16) as shown in Figure 7.
S c re w s
(#15)
N u ts
(#16)
B ase
(#09)
(9)
(16)
(15)
Figure 7 -- Locking the Vise
Step 3: Tighten the SCREWS (15) until they press the
GIB (14, not shown) against the BASE (9).
Step 4: Tighten the NUTS (16) to lock the BASE (9) in position.
Step 5: Repeat, if desired, for the unlocked Base.
MAINTENANCE
Occasional lubrication of the Vise will ensure
smooth operation and longer tool life. Use
a light oil for lubrication purposes. Refer
to Figure 8 for lubrication points.
1
2
3
4
5
Figure 8 -- Lubrication Points
REV 10l