Table of Contents Safety Safety.......................................................... 2 Specifications.............................................. 6 Setup........................................................... 6 Operation..................................................... 7 Maintenance............................................... 10 Parts List and Diagram............................... 14 Warranty.....................................................
General Tool Safety Warnings (cont.) 0–6 18 16 16 14 6.1 – 10 18 16 14 12 10.1 – 12 16 16 14 12 12.1 – 16 14 12 Do not use. 9. USE PROPER EXTENSION CORD. Make sure your extension cord is in good condition. When using an extension cord, be sure to use one heavy enough to carry the current your product will draw. An undersized cord will cause a drop in line voltage resulting in loss of power and overheating.
Grounding Instructions Safety TO PREVENT ELECTRIC SHOCK AND DEATH FROM INCORRECT GROUNDING WIRE CONNECTION READ AND FOLLOW THESE INSTRUCTIONS: 110-120 V~ Grounded Tools: Tools with Three Prong Plugs 1. In the event of a malfunction or breakdown, grounding provides a path of least resistance for electric current to reduce the risk of electric shock. This tool is equipped with an electric cord having an equipment-grounding conductor and a grounding plug.
16. Industrial applications must follow OSHA guidelines. 17. Maintain labels and nameplates on the tool. These carry important safety information. If unreadable or missing, contact Harbor Freight Tools for a replacement. 18. Avoid unintentional starting. Prepare to begin work before turning on the tool. 19. People with pacemakers should consult their physician(s) before use. Electromagnetic fields in close proximity to heart pacemaker could cause pacemaker interference or pacemaker failure. 20.
Specifications SAFETy Electrical Rating 120VAC / 60Hz / 5.5A Motor No Load Speed 5000 RPM Max. Accessory Diameter 6" Arbor Size 7/8" 3150240 Setup - Before Use: Read the ENTIRE IMpORTANT SAFETy INFORMATION section at the beginning of this manual including all text under subheadings therein before set up or use of this product.
Operating Instructions Read the ENTIRE IMpORTANT SAFETy INFORMATION section at the beginning of this manual including all text under subheadings therein before set up or use of this product. SAFETy Tool Set Up TO pREVENT SERIOUS INJURy FROM AccIDENTAL OpERATION: Release the pressure and unplug the tool from its electrical outlet before assembling or making any adjustments to the tool. TO pREVENT SERIOUS INJURy: DO NOT OpERATE WITH ANy GUARD DISABLED, DAMAGED, OR REMOVED. Installing the Wheel 3.
Clamp Knob Angle Guide Bolt Flip open SAFETy Two Locations Quick Release Figure c The Clamp and Angle Guide are used together to hold the workpiece securely in place. The Angle Guide can be adjusted from 0 to 45° for straight or angled cuts. Adjust the Angle Guide first, then secure the workpiece in place with the Clamp. 1. To adjust the Angle Guide: 2. To secure a workpiece in the Clamp: SETUp a. Loosen both Bolts. a. Turn the Handle counterclockwise a quarter turn. b.
1. Designate a work area that is clean and well‑lit. The work area must not allow access by children or pets to prevent distraction and injury. 2. Route the power cord along a safe route to reach the work area without creating a tripping hazard or exposing the power cord to possible damage. The power cord must reach the work area with enough extra length to allow free movement while working. 3. Secure loose work pieces using the clamp to prevent movement while working.
Maintenance and Servicing Procedures not specifically explained in this manual must be performed only by a qualified technician. Safety TO PREVENT SERIOUS INJURY FROM ACCIDENTAL OPERATION: Release the Trigger and unplug the tool from its electrical outlet before performing any inspection, maintenance, or cleaning procedures. TO PREVENT SERIOUS INJURY FROM TOOL FAILURE: Do not use damaged equipment. If abnormal noise or vibration occurs, have the problem corrected before further use.
Troubleshooting Tool operates slowly. Performance decreases over time. 3. Internal damage or wear. (Carbon Brushes or switch, for example.) Extension cord too long or wire size too small. 1. Accessory dull or damaged. 2. Carbon brushes worn or damaged. Excessive noise Internal damage or wear. (Carbon or rattling. Brushes or bearings, for example.) Overheating. 1. Forcing machine to work too fast. 2. Accessory misaligned. 3. Accessory dull or damaged. 4. Blocked motor housing vents. 5.
PLEASE READ THE FOLLOWING CAREFULLY Safety THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT.
Safety Setup Operation Maintenance Record Product’s Serial Number Here: Note: If product has no serial number, record month and year of purchase instead. Note: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. Item 61204 For technical questions, please call 1-888-866-5797.
Parts List and Diagram Parts List Safety Part Setup Operation 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 Description Knob Mechanical Spring Moveable Guard Outer Flange Nut Inner Flange Ø5x12 S/T Screw Ø5 Spring Washer Grinder Cover Output Shaft 2.
Maintenance Operation Setup Safety Assembly Diagram Item 61204 For technical questions, please call 1-888-866-5797.
Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.
