Product manual

Page 6 For technical questions, please call 1-888-866-5797. Item 47840
SAFETY OPERATION MAINTENANCESETUP
Specifications
Capacity 4‑1/2″ x 4‑1/2″
Motor 120V~ / 60Hz / 6A
Blade FPM 0 ~ 230
Blade TPI 14
Blade Dimensions 44‑7/8″ L x 1/2″ W x 0.025″ Thick
Features 3 Bearing Blade Guide,
Trigger Lock, Variable Speed
E194601
Note: Performance of this tool (if powered by
line voltage) may vary depending on variations
in local line voltage. Extension cord usage
may also affect tool performance.
Setup - Before Use:
Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this manual
including all text under subheadings therein before set up or use of this product.
TO PREVENT SERIOUS INJURY FROM ACCIDENTAL OPERATION:
Turn the Power Switch of the tool off and unplug the tool from its electrical outlet
before assembling or making any adjustments to the tool.
Note: For additional information regarding the parts listed in the
following pages, refer to Parts List and Diagram on page 10.
Guide Bar Assembly
1. Assemble the Guide Bar (63) to the
bandsaw before operation.
2. Remove the Screws (62) on the Frame (21),
along with their Lock and Flat Washers (47, 46).
3. Install the Guide Bar around the blade as shown
using the Screws (62), Lock Washers (47),
and Flat Washers (46). See Figure A.
63
46, 47, & 62
Figure A: Guide Bar
Trigger
Lock
Trigger
(with Speed Dial)
Auxiliary
Handle
Tension
Handle
Blade
Guide
Bar
Figure B: Functions