Product manual

Page 3For technical questions, please call 1-800-444-3353.Item 69159

Specifications

Overall Base Dimensions

7 IN. X 8-1/2 IN. X 6 IN. High

Maximum Jaw Opening 4-3/4"

Cross Travel 7-1/8"

Jaw Depth 1"

Longitudinal Travel 6-1/8"

Features 56 Square Inch X and Y Movement Calibrated to Scales

Setup - Before Use:

Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this

manual including all text under subheadings therein before set up or use of this product.

Note: For additional information regarding the parts listed in the following

pages, refer to Parts List and Diagram on page 7.

Assembly/Mounting

1. Make sure the power-head of your drill press

is fastened securely to the column of the drill

press. Lock the worktable into place.

2. Secure the Lower Base (1) of the Vise in the center

of the drill press worktable, using appropriate

hardware, as provided with or explained in the

manual for the drill press machine (hardware not

included). Make sure that the hardware used

solidly secures the vise and does not interfere with

the X/Y adjustment of the vise. See Figure 1.

Functions

Vise Jaws

Lower Base (1)

Vise Adjustment

Screw (8)

Vise Adjustment Screw (8)

Upper Base Screw (17)

Vise Jaw Screw (19)

Middle Base Screw (10)

Middle Base (14)

Upper Base (18)

Figure 1