Table of contents SAFETy Safety .................................................2 Specifications .....................................8 Operation ............................................9 Maintenance ......................................10 Parts List and Diagram ......................11 Warranty ............................................12 WARNING SyMBOLS AND DEFINITIONS This is the safety alert symbol. It is used to alert you to potential personal injury hazards.
4. Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric shock. 2. Avoid body contact with grounded 5. When operating a power tool outdoors, use an extension cord surfaces such as pipes, radiators, ranges and refrigerators. There is an increased suitable for outdoor use.
power Tool Use and care SAFETy 1. Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed. 2. Disconnect the plug from the power source before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally. SETUp 3.
14. WARNING: Some fumes created by woodburner usage contain chemicals known [to the State of California] to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are: • Lead from lead-based paints • Crystalline silica from bricks and cement or other masonry products • Arsenic and chromium from chemically treated lumber Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these 15.
Grounding SAFETy TO pREVENT ELEcTRIc SHOcK AND DEATH FROM INcORREcT GROUNDING WIRE cONNEcTION: check with a qualified electrician if you are in doubt as to whether the outlet is properly grounded. Do not modify the power cord plug provided with the tool. Never remove the grounding prong from the plug. Do not use the tool if the power cord or plug is damaged. If damaged, have it repaired by a service facility before use.
Extension cords SAFETy Symbology Double Insulated Canadian Standards Association A Amperes WARNING marking concerning Risk of Eye Injury. Wear ANSI-approved safety goggles with side shields. Underwriters Laboratories, Inc. Read the manual before set-up and/or use. V Volts ~ Alternating Current WARNING marking concerning Risk of Fire. Do not cover ventilation ducts. Keep flammable objects away. WARNING marking concerning Risk of Electric Shock. Properly connect power cord to appropriate outlet.
Specifications SAFETy Power Rating Soldering Tips Woodburning Tips Other Accessories 120VAC, 30W Three (Fine, Chisel, Pointed) Four (All-Purpose, Script, Grading & Dot) Fusing Tip Safety Hanger Carrying Case SETUp OpERATION MAINTENANcE Page 8 For technical questions, please call 1-888-866-5797.
Operating Instructions SAFETy Read the ENTIRE IMpORTANT SAFETy INFORMATION section at the beginning of this manual including all text under subheadings therein before set up or use of this product. Tool Set Up TO pREVENT SERIOUS INJURy FROM AccIDENTAL OpERATION: Make sure that the Trigger is in the off-position and unplug the tool from its electrical outlet before adjusting tool or installing accessories. Select the desired Soldering or Woodburning Tip and thread it onto the end base of the Woodburner.
Maintenance and Servicing SAFETy procedures not specifically explained in this manual must be performed only by a qualified technician. TO pREVENT SERIOUS INJURy FROM AccIDENTAL OpERATION: Unplug the tool from its electrical outlet and allow it to cool completely before performing any inspection, maintenance, or cleaning procedures. TO pREVENT SERIOUS INJURy FROM TOOL FAILURE: Do not use damaged equipment. If abnormal noise or vibration occurs, have the problem corrected before further use.
part 1 2 3 4 5 6 Description Hobby Tool Connector Script Woodburning Tip Script Tip Holder Pointed Soldering Tip Dot Woodburning Tip Qty 1 1 1 1 1 1 part 7 8 9 10 11 Description Fusing Tip Fine Soldering Tip Chisel Soldering Tip All-Purpose Woodburning Tip Grading Woodburning Tip Qty 1 1 1 1 1 SAFETy parts List and Diagram 11 SETUp 1 2 3 4 OpERATION 10 5 9 7 8 MAINTENANcE 6 Record product’s Serial Number Here: Note: If product has no serial number, record month and year of purchase instea
Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.
