Product manual

Page 5For technical questions, please call 1-800-444-3353.Item 67698
SAFETYMAINTENANCEPARTS LIST SETUP
Grounding
TO PREVENT ELECTRIC SHOCK AND DEATH
FROM INCORRECT GROUNDING WIRE CONNECTION:
Check with a qualified electrician if you are in doubt as to whether the outlet is properly grounded.
Do not modify the power cord plug provided with any motor used with this Compressor Pump.
Never remove the grounding prong from the plug. Do not use the motor if the power cord or plug is damaged.
If damaged, have it repaired by a service facility before use. If the plug will not fit the outlet, have a proper
outlet installed by a qualified electrician.
Symbology
PSI
Pounds per square inch of pressure
CFM
Cubic Feet per Minute flow
SCFM
Cubic Feet per Minute flow
at standard conditions
NPT
National pipe thread, tapered
NPS
National pipe thread, straight
Double Insulated
Canadian Standards Association
Underwriters Laboratories, Inc.
V
Volts
~
Alternating Current
A
Amperes
Specifications
Type Single Stage Twin Cylinder; Oil Lubricated
Required HP 5 HP motor
Rated Air Pressure 145 PSI
Maximum Speed 1050 RPM
Air Outlet 1" –16 UN
Air Delivery
@ 1050 RPM
17.3 SCFM @ 40 PSI
15.2 SCFM @ 90 PSI
Lubrication Splash Type with Oil Level Window
Oil Type
SAE 30W non-detergent Air Compressor Oil
(Sold separately)
Pump Pulley 14-1/2" diameter with double V-groove
Belt Type A 1600
Mounting Hole
Pattern
5-1/4" x 10-1/4" (center-to-center)
Four 7/16" diameter holes
Recommended
Mounting Bolts
3/8" diameter, grade 5 or better
Overall Dimensions 17-3/4" L x 12-1/4" W x 15" H
Sound Level 89 dB @ 1m