Product manual

Page 8 For technical questions, please call 1-888-866-5797. Item 62422
Blade Installation
1. Refer to the Chart below to select the proper
Saw Blade for the material being cut.
BLADE SELECTION AND SUITABLE SPEED
Material TPI Speed
Soft Wood 6 6
Hardwood 6 5
Plastic 12 4 ~ 6
Aluminum 12 3 ~ 6
Steel 24 2 ~ 4
Tile 24 1 ~ 3
Glass 32 1 ~ 3
Leather (Knife Edge) 4 ~ 6
Rubber (Knife Edge) 4 ~ 6
WARNING! Wear ANSI-approved safety goggles
and heavy-duty work gloves when changing blade.
2. Once the proper blade (sold separately)
is selected, lift the Blade Cover (14)
up to access the Blade Release
Lever. See Figure 1, below.
Blade Cover (14)
Blade Release
Lever
Collet
Blade
Roller
Guide
Figure 1
3. Pull Blade Release Lever counterclockwise
to open Blade Collet.
4. With the blade teeth facing FORWARD,
inset blade into blade holding Collet as far
as it will go. WARNING! Make sure blade’s
back edge is set against the roller guide.
5. Release the blade release lever. Pull on blade
until blade Collet snaps blade into place.