Product manual

SKU 99721 For technical questions, please call 1-888-866-5797. Page 4
SPECIFICATIONS
Weight Capacity 400 Pounds
Motorcycle Platform Size 78-3/4” L X 8-5/8” W
Receiver Size 2”
UNPACKING
When unpacking, make sure that
item is intact and undamaged. If any parts
are missing or broken, please call Harbor
Freight Tools at number shown on cover of
this manual as soon as possible.
ASSEMBLY
Read ENTIRE IMPORTANT
SAFETY INFORMATION
section at beginning of this
manual including all text under
subheadings therein before set
up or use of this product.
1.
1
23
22
21
Attach the two Wheel Clamps (23) to
the Platform (1), using two Bolts (21)
and Lock Nuts (22) each Clamp.
2.
3
13,14
15
7
5
12
17
4
11
20
18,19
Remove all Bolts (11,12,20), Washers
(14,18), Nuts (13,15,19), Pins (5,7)
and Brackets (4,17) from Tube (3), as
shown above.
3. Insert Tube into Platform (1) and
secure with two Bolts (12), Washers
(14), and Nuts (13).
4. Attach Tie Down Brackets (4) to Tube
with Bolt (11) and Nut (15).
5. Insert Tube into Class III (or better) 2”
receiver of a vehicle and lock in place
with Hitch Pin (5). Insert R-Pin (7)
through hole in Hitch Pin to hold it in
place.
6. Attach Stabilizers (17) to Tube using
Bolt (20), Washer (18), and Nut (19).
Tighten Stabilizers in place to reduce
vibration of the Carrier.