Product manual

SKU 99721 For technical questions, please call 1-888-866-5797. Page 3
This enables better control of the
product in unexpected situations.
d. Dress properly. Do not wear loose
clothing or jewelry. Keep your
hair, clothing and gloves away
from moving parts. Loose clothes,
jewelry or long hair can be caught in
moving parts.
e. Only use safety equipment that
has been approved by an appropri-
ate standards agency. Unapproved
safety equipment may not provide
adequate protection. Eye protection
must be ANSI-approved.
3. Carrier use and care
a. Store the Carrier out of the reach
of children and do not allow per-
sons unfamiliar with the it or these
instructions to operate. Equipment
is dangerous in the hands of un-
trained users.
b. Maintain the Carrier. Check for
misalignment or binding parts,
breakage of parts and any other
condition that may affect opera-
tion. If damaged, have the product
repaired before use. Many ac-
cidents are caused by poorly main-
tained products.
c. Use the Carrier in accordance with
these instructions, taking into ac-
count the working conditions and
the work to be performed. Use of
this equipment for operations differ-
ent from those intended could result
in a hazardous situation.
Motorcycle Carrier Safety
Warnings
1. Secure motorcycle frame and wheels
securely using ratcheting tie downs
(not included) and included pins.
2. Push, do not drive, the motorcycle
onto the Carrier.
3. Obey all DOT regulations pertaining
to mounting the Carrier onto a ve-
hicle.
4. Only use this product with a vehicle
that has a 2” square receiver hitch,
rated to at least Class III, and can
bear the additional weight of both the
Carrier and motorcycle.
5. Do not sit on motorcycle while load-
ing, unloading, or while supported on
carrier.
6. Do not exceed maximum load for this
product (400 lb.). Loading a heavier
object on this product can result in
dangerous conditions to both the
operator and the item loaded.
7. Maintain labels and nameplates on
the tool. These carry important safety
information. If unreadable or miss-
ing, contact Harbor Freight Tools for a
replacement.
8. Keep bystanders out of the area dur-
ing assembly, loading and unloading.
9. The warnings, precautions, and in-
structions discussed in this instruction
manual cannot cover all possible con-
ditions and situations that may occur.
It must be understood by the operator
that common sense and caution are
factors which cannot be built into this
product, but must be supplied by the
operator.
SAVE THESE
INSTRUCTIONS.