Product manual

Page 4 For technical questions, please call 1-888-866-5797. Item 62313
User Instructions
Read the ENTIRE IMPORTANT INSTRUCTIONS section at the beginning of this manual
including all text under subheadings therein before set up or use of this heater.
TO PREVENT SERIOUS INJURY FROM BURNS, FIRE OR ELECTRIC SHOCK:
Turn all heater controls off, unplug the heater from its electrical outlet, and allow the
heater to cool completely before set up or making any adjustments to the heater.
Operation
Function KnobTimer Knob
Figure A: Controls and Indicators
1. Place heater on a hard, stable, level
surface away from flammable objects.
2. Make sure that all controls are in
their off-position, then plug the
heater directly into a wall outlet.
3. Turn the Function Knob to the
desired function (see Figure A):
LOW - Low heat setting.
Heater will not turn.
HIGH - High heat setting.
Heater will not turn.
LOW TURN - Low heat setting.
Heater will slowly oscillate.
HIGH TURN - Low heat setting.
Heater will slowly oscillate.
4. Turn the Timer Knob to the
desired operation time, in minutes.
Turn the Timer Knob to ON for continuous
operation without automatic shutoff.
WARNING! TO PREVENT SERIOUS INJURY
AND DEATH FROM FIRE:
Even though this heater has a
Tip Over Shutoff Switch, it must be
monitored at all times while operating.
The Tip Over Shutoff Switch is a backup
safety device only, and is not intended
to permit unattended operation.
5. To prevent accidents, turn all heater
controls off and unplug it after use.
6. Allow heater to cool completely,
then clean, and store the heater
indoors out of children’s reach.