Product manual

Page 4 For technical questions, please call 1-800-444-3353. Item 94777
UNPACKING
When unpacking, check to make sure that the item is intact and undamaged. If any
parts are missing or broken, please call Harbor Freight Tools at the number on the cover of
this manual as soon as possible.
OPERATING INSTRUCTIONS
1. Place the Parabolic Heater on a dry oor away from any combustible materials.
2. Also keep pets and children away from the Parabolic Heater.
3. Plug the line cord into an electrical outlet.
4.
Switch Knob (10)
Push here to tilt back or pull forward.
Overheat Alarm Light (20)
Turn the Switch Knob to the desired operation setting.
LO
(low-heat, no movement),
LO
(low-heat, oscillating),
HI
(high-heat, no movement),
HI
(high-heat, oscillating)
5. When nished using the Parabolic Heater, turn the Switch Knob to Off.
6. Wait for it to cool down completely before storing. WARNING! Storing or moving
this heater while hot or plugged in could result in re or severe burns.
Safety Features
1. This heater includes a safety Tip-over Switch (11) that will shut off the heater if it
becomes tipped over.
2. This heater also includes a Thermal Cut-off Switch (5). This will shut off the heater if
it starts to overheat. The Overheat Alarm light will illuminate as well. If this occurs,
unplug the heater, allow the unit to cool completely and remove all obstructions from
near the heater’s vents before resuming use.