Product manual

Page 3For technical questions, please call 1-800-444-3353.SKU 91883
Figure 1
Top Pole Covers (1)
Bottom Shelf (3)
with Stand Feet (4).
Stand Feet (4)
Top Pole Covers (1)
Supporting Poles (2)
Between Shelves (3).
ASSEMBLY INSTRUCTIONS
Attach each Shelf (3) with the Supporting Poles (2) as shown in 1. Figure 1. It is
recommended that you start assembling bottom shelves rst and work upward.
On the bottom Shelf (3), push in the four Stand Feet (4).2. See Figure 1. Stand
Shelf Rack upright. Tap on the Top Pole Covers (1) in the holes in the top Shelf (3)
for a nished look. Check to see that the Shelf Rack is level.
CAUTION! Distribute weight evenly on shelves. Each shelf has a capacity of 44 lb.
maximum. Place Shelf Rack on a smooth, hard, level surface.
PLEASE READ THE FOLLOWING CAREFULLY
THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND
ASSEMBLY DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE
MANUFACTURER OR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY
OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS
TO THE PRODUCT, OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF
THE PRODUCT. IN FACT, THE MANUFACTURER AND/OR DISTRIBUTOR EXPRESSLY
STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN
BY CERTIFIED AND LICENSED TECHNICIANS, AND NOT BY THE BUYER. THE BUYER
ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE
ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR
HER INSTALLATION OF REPLACEMENT PARTS THERETO.