Product manual

ManualsBrandsHarbor Freight Tools ManualsVises & AnvilsHarbor Freight Tools 4 In Drill Press Vise

Drill Press Vise

Item 30999

Read this material before using this product.

Failure to do so can result in serious injury.

SAVE THIS MANUAL.

When unpacking, make sure that the product is intact and undamaged.

If any parts are missing or broken, please call 1-800-444-3353 as soon as possible.

Visit our website at: http://www.harborfreight.com

Email our technical support at: tech@harborfreight.com

2010 by Harbor Freight Tools

reproduced in any shape or form without the express written consent of Harbor Freight Tools. Diagrams within this manual may not be

drawn proportionally. Due to continuing improvements, actual product may differ slightly from the product described herein.

Tools required for assembly and service may not be included.

Revised Manual 11f

Summary of content (4 pages)

PAGE 1
Drill Press Vise Item 30999 Read this material before using this product. Failure to do so can result in serious injury. SAVE THIS MANUAL. When unpacking, make sure that the product is intact and undamaged. If any parts are missing or broken, please call 1-800-444-3353 as soon as possible. Visit our website at: http://www.harborfreight.com Email our technical support at: tech@harborfreight.com Copyright© 2010 by Harbor Freight Tools®. All rights reserved.
PAGE 2
d. Do not overreach. Keep proper footing and balance at all times. This enables better control of the tool in unexpected situations. SAVE THIS MANUAL Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference. IMPORTANT SAFETY INFORMATION e.
PAGE 3
5. The warnings, precautions, and instructions discussed in this instruction manual cannot cover all possible conditions and situations that may occur. It must be understood by the operator that common sense and caution are factors which cannot be built into this product, but must be supplied by the operator. OPERATION 1. Turn Lock Bar to open Jaws and place workpiece between the jaws. 2. Close the Jaws until the workpiece is held securely. Do not overtighten the Jaws.
PAGE 4
LIMITED 90 DAY WARRANTY Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.