Product manual

ManualsBrandsHarbor Freight Tools ManualsSpecialty MeasuringHarbor Freight Tools 4 in. Digital Caliper

1

2

3

Page 3For technical questions, please call 1-888-866-5797.Item 47256

Instructions

1. Push the OFF ON button to turn caliper on.

2. To toggle measurement between inches

and millimeters, press in/mm button.

3. With jaws closed, press ZERO

to set readout to 0.

4. To measure outside of object,

set the bottom prongs outside

object being measured. Slide the jaws

together until they gently contact the item.

5. To measure inside of object, set the

top prongs inside object being measured.

Spread prongs apart until they

touch surface of object.

6. When finished, press OFF ON

to turn off Caliper.

7. To replace battery, open battery

compartment to right of display, install

new SR44 battery positive (flat) side up,

and slide Battery Cover back into place.

Note: Replacement parts are not available.

Outside Measurement Inside Measurement

Depth Measurement Step Measurement