Product manual

Page 8 For technical questions, please call 1-888-866-5797. Item 61826
Maintenance and Servicing
Procedures not specically explained
in this manual must be performed
only by a qualied technician.
TO PREVENT INJURY FROM
ACCIDENTAL OPERATION:
Release the Trigger and disconnect
Adapter before performing any inspection,
maintenance, or cleaning procedures.
TO PREVENT INJURY FROM TOOL FAILURE:
Do not use damaged equipment. If abnormal
noise or vibration occurs, have the problem
corrected before further use.
Cleaning, Maintenance,
and Lubrication
1. BEFORE EACH USE, inspect the general condition
of the tool. Check for loose hardware, misalignment
or binding of moving parts, cracked or broken
parts, damaged electrical wiring, and any other
condition that may affect its safe operation.
2. AFTER USE, wipe external surfaces of the tool with
clean cloth.
NOTE: INTERNAL Ni-Cd BATTERY MUST BE
REMOVED AND DISPOSED OF PROPERLY. Do
not short, incinerate or open internal battery.
3. When storing, always store in clean, dry and
safe location out of reach of children.
4.
WARNING! If the supply cord of this power
tool’s adapter is damaged, it must be replaced
only by a qualied service technician.