Specifications Adapter Input 120 VAC / 60 Hz Motor Speed 0-180 RPM Chuck 1/4”, Magnetic Max. Torque 45 inch-lbs. WARNING indicates a hazardous situation which, if not avoided, could result in death or serious injury. Charging Time 5-7 Hours Battery Type DANGER indicates a hazardous situation which, if not avoided, will result in death or serious injury. 4.
. Personal safety a. Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury. b. Use personal protective equipment. Always wear eye protection.
6. Do not leave the tool unattended when it is plugged into an electrical outlet. Turn off the tool, and unplug it from its electrical outlet before leaving. 7. This product is not a toy. Keep it out of reach of children. 8. People with pacemakers should consult their physician(s) before use. Electromagnetic fields in close proximity to heart pacemaker could cause pacemaker interference or pacemaker failure. In addition, people with pacemakers should: • Avoid operating alone.
Symbology Grounding Double Insulated TO PREVENT ELECTRIC SHOCK AND DEATH FROM INCORRECT GROUNDING WIRE CONNECTION: Check with a qualified electrician if you are in doubt as to whether the outlet is properly grounded. Do not modify the power cord plug provided with the tool. Never remove the grounding prong from the plug. Do not use the tool if the power cord or plug is damaged. If damaged, have it repaired by a service facility before use.
Instructions for Putting into Use Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this manual including all text under subheadings therein before set up or use of this product. TO PREVENT INJURY FROM ACCIDENTAL OPERATION: Release the Trigger and disconnect Power Adapter before assembling or making any adjustments to the tool. Note: For additional information regarding the parts listed in the following pages, refer to Parts List and Assembly Diagram on page 8.
5. Squeeze and hold down the top Forward Trigger to start clockwise rotation. For reverse (counterclockwise) rotation, squeeze the bottom Reverse Trigger. Operating Instructions Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this manual including all text under subheadings therein before set up or use of this product. 6. When finished using the Screwdriver, release the Forward / Reverse Trigger to turn off the tool. 7.
Maintenance and Servicing Procedures not specifically explained in this manual must be performed only by a qualified technician. TO PREVENT INJURY FROM ACCIDENTAL OPERATION: Release the Trigger and disconnect Adapter before performing any inspection, maintenance, or cleaning procedures. TO PREVENT INJURY FROM TOOL FAILURE: Do not use damaged equipment. If abnormal noise or vibration occurs, have the problem corrected before further use. Cleaning, Maintenance, and Lubrication 1.
Troubleshooting Problem Tool will not start. Possible Causes 1. No power at outlet during charging. 2. Internal damage or wear. (Carbon brushes or switch, for example.) Carbon brushes worn or damaged. Performance decreases over time. Excessive noise Internal damage or wear. (Carbon or rattling. brushes or bearings, for example.) Overheating. 1. Forcing tool to work too fast. 2. Blocked motor housing vents. Likely Solutions 1. Check power at outlet.
Parts List and Assembly Diagram PLEASE READ THE FOLLOWING CAREFULLY THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT.
21 20 24 19 Assembly Diagram 22 23 18 17 16 15 26 14 13 27 28 12 11 10 32 29 9 30 8 7 31 6 5 If product has no serial number, record month and year of purchase instead. 25 Note: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. Record Product’s Serial Number Here: Note: 4 3 33 2 34 1 Page 11 For technical questions, please call 1-888-866-5797.
Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.
