Product manual

SKUs
09646,
For technical questions, please call 1-800-444-3353. Page 4
90218
Figure 9
Trigger
Pan (9)
Trigger
Hook (7)
Turning
Sleeve (8)
Trigger
(Rod)
Trigger
Pan (9)
Trigger
Hook (7)
Figure 8
5. Adjust the Trigger’s sensitivity by adjusting Trigger Hook (7) all the way as far as
it goes under the Turning Sleeve (8) for a “coarse setting”. This will need a LOT of
weight on the Trigger Pan (9) to pull the Trigger Hook (7) off the Turning Sleeve (8)
on the Front Door (5) and releases the Front Door. See Figure 8 & 9.
For a more sensitive setting, hook the Trigger Hook on the Turning Sleeve (8) only 6.
with the TIP of the Hook. The weight of a light weight animal will pull the Trigger
hook off the Turning Sleeve and release the Front (Trap) Door (5) with that weight on
the Trigger Pan (9).
A pair of pliers can reshape the Trigger Hook for any ne adjustment you may need. 7.
Practicing the settings of the Trigger with a pencil or screwdriver on the Trigger Pan
(9) and how much pressure is needed for releasing of the Front Door (5), should give
you the desired setting you will need for the animal you plan to catch.
To Collapse Trap
Figure 10
Collapse the Trap by undoing the clips holding the Cage Support Brace (10) and
folding it out of the way. Fold Rear Door (2) underneath Trap. Hold Front Door (5)
open. Then, fold Trap in direction of arrow. See Figure 10.