Product manual

Page 3For technical questions, please call 1-888-866-5797.Item 61930
Assembly Instructions
Note: Use a rubber mallet to ensure
snug connection of all nonmetal parts.
1. Place the bases of the four Legs (5,6)
into the corners of the Lower Tray (2).
The flange on each Post will
only fit into certain corners.
2. Insert Carriage Bolts (10) down through
the holes in the bases of the Posts (5,6).
3. Attach Casters (8,9) to Carriage
Bolts (10) using Split Washers (11)
and Nuts (12). For best operation,
the two Straight Casters (9) go on
the same end of the cart, and the two
Swivel Casters (8) go on the other end.
4. Place the Upper Tray (1) upside
down on the work surface.
Turn the Handle (3) upside down
with the cup holder toward the Tray
and the hand holes on the outside.
5. Place the Tray with the Handle
firmly on top of the Legs (5,6).
Position the Handle above either
the swivel or fixed casters,
depending on operating preference.
6. Use three Screws (7) through each Leg
(5,6) from underneath to secure them.
Parts List and Diagram
Part Description Qty
1 Upper Tray 1
2 Lower Tray 1
3 Handle 1
4 Rod 1
5 Leg L 2
6 Leg R 2
7 Screw 12
8 Swivel Caster 2
9 Fixed Caster 2
10 Bolt 16
11 Washer 16
12 Nut 16
2
3
1
6
5
9
8
10
4
7
11
12