Product manual

Page 5For technical questions, please call 1-800-444-3353.Item 69721
User Servicing Instructions
Procedures not specifically explained in this manual must
be performed only by a qualified technician.
TO PREVENT SERIOUS INJURY FROM ACCIDENTAL OPERATION OR ELECTRIC SHOCK:
Turn the Power Switch of the blower off, unplug the blower from its
electrical outlet, and allow the blower to cool completely before performing
any inspection, maintenance, or cleaning procedures.
TO PREVENT SERIOUS INJURY FROM BLOWER FAILURE:
Do not use damaged equipment. If abnormal noise or vibration occurs,
have the problem corrected before further use.
1. BEFORE EACH USE, inspect the general
condition of the blower. Check for:
• loose hardware,
• misalignment or binding of moving parts,
• cracked or broken parts,
• damaged electrical wiring, and
• any other condition that may
affect its safe operation.
2. Clean outside housing regularly.
Use damp cloth during cleaning and
dry before use. Do not open housing
for cleaning or any other reason.
3. WARNING! If the supply cord of this
blower is damaged, it must be replaced
only by a qualified service technician.
If blower suddenly stops operating
The Overload Protection may have tripped.
Before pressing the Reset Button and continuing to use the blower, make sure:
• that the blower is dry,
• that the vents are not obstructed, and
• that the blower has cooled completely.