Product manual

Page 4 For technical questions, please call 1-800-444-3353. Item 69721
Operation
Read the ENTIRE RULES FOR SAFE OPERATION section at the beginning of this
manual including all text under subheadings therein before set up or use of this blower.
1. Make sure the blower’s Speed Control
is in the ″OFF″ position.
2. Plug the Power Cord into a
GFCI-protected outlet.
3. Position the blower as desired.
It can rest on different Pads to
direct the airflow at different angles.
It must rest on a level, firm base.
4. Leave adequate space around the blower
for unimpeded air flow. Air flows in at the
sides of the blower. Do not allow dirt or
debris to be drawn into the blower.
5. Rotate the Speed Control to the desired speed
setting. To turn the blower OFF, rotate the
blower’s Speed Control to the ″OFF″ position.
Note: If blower suddenly stops operating,
the Overload Protection may have tripped.
Make sure that the blower is dry, that the
vents are not obstructed, and that the blower
has cooled completely before pressing the
Reset Button and continuing to use the blower.
6. Additional powered devices can be plugged
into the 120V~ outlets on the sides of the
blower. Do not exceed 13A combined
current draw across the two outlets.
7. To prevent accidents, turn off the blower
and unplug it after use. Clean, then store
the blower indoors out of children’s reach.
Speed Control
Reset
Button
Figure A: Controls - top view
Air
Outlet
Air
Inlet
120V~
Outlet
Handle
Pads
Figure B: Additional Components