Product manual

Page 7For technical questions, please call 1-800-444-3353.SKU 67996
When wheel is binding or when 3.
interrupting a cut for any reason,
switch off the air tool and hold the air
tool motionless until the wheel comes
to a complete stop. Never attempt to
remove the cut-off wheel from the cut
while the wheel is in motion otherwise
kickback may occur. Investigate and
take corrective action to eliminate the
cause of wheel binding.
Do not restart the cutting operation 4.
in the workpiece. Let the wheel reach
full speed and carefully reenter the
cut. The wheel may bind, walk up or
kickback if the air tool is restarted in the
workpiece.
Support panels or any oversized 5.
workpiece to minimize the risk of
wheel pinching and kickback. Large
workpieces tend to sag under their own
weight. Supports must be placed under
the workpiece near the line of cut and
near the edge of the workpiece on both
sides of the wheel.
Use extra caution when making a 6.
“pocket cut” into existing walls or
other blind areas. The protruding
wheel may cut gas or water pipes,
electrical wiring or objects that can cause
kickback.
Vibration Safety
This tool vibrates during use. Repeated


particularly to the hands, arms and shoulders.

Anyone using vibrating tools regularly 1.

be examined by a doctor and then have

medical problems are not being caused
or worsened from use. Pregnant
women or people who have impaired
blood circulation to the hand, past hand

diabetes, or Raynaud’s Disease should
not use this tool. If you feel any medical
or physical symptoms related to vibration
(such as tingling, numbness, and white

soon as possible.
Do not smoke during use. Nicotine 2.
reduces the blood supply to the hands


Wear suitable gloves to reduce the 3.
vibration effects on the user.
Use tools with the lowest vibration when 4.
there is a choice between different
processes.
5.
of work.
Grip tool as lightly as possible (while still 6.

do the work.
To reduce vibration, maintain the tool 7.
as explained in this manual. If any
abnormal vibration occurs, stop use
immediately.
SAVE THESE
INSTRUCTIONS.