Product manual

Page7For technical questions, please call 1-800-444-3353.Item61176
SAFETYOPERATIONMAINTENANCE SETUP
Setup - Before Use:
Read the ENTIRE IMPORTANT SAFETY INFORMATION section
at the beginning of this manual including all text under
subheadings therein before set up or use of this product.
Functions
Inlet
Fittings
Switch
(hidden from
this angle)
Oil Fill
Plug
Oil Drain
Plug
Oil Sight
Glass
Operating Instructions
Read the ENTIRE IMPORTANT SAFETY INFORMATION section
at the beginning of this manual including all text under
subheadings therein before set up or use of this product.
Tool Set Up
1. BeforeoperatingtheVacuumPump,
checktheoillevelbyplacingthe
VacuumPumponaflat,levelsurface.
ObservetheOilSightGlass.Theoilshould
beatthefilllineontheOilSightGlass.
2. Ifoilisneeded,unscrewtheOilFillPlugand
addoilthroughtheholeunderthefitting.
Usealowviscosityvacuumpumpoil
(i.e.,HFV-46).
3. Inspectthesealing“O”Ringeachtimethe
OilFillPlugisremoved.Lookforpossible
tears,cracks,ordamage.Replaceifneeded.
4. ReplacetheOilFillPlugand
tightensecurelytopreventoilfrom
escapingunderpressureduringuse.
OPERATION