Product manual

Page 2 For technical questions, please call 1-888-866-5797. Item 95877
SPECIFICATIONS
Electrical Requirements 120VAC / 60Hz / 3.2A
Variable Speed 0 ~ 1500 RPM
Power Cord 18 AWG x 2C / 6′ 1″ Long
Drill Type Close Quarter
Drill Chuck Type 3-Jaw / Keyless
Chuck Capacity 1/16″ ~ 3/8″
Drilling Capacities Ferrous = 1/4″ / Non-Ferrous = 5/16″ / Wood = 1/2″
Reversible Yes. Clockwise and Counterclockwise Rotation.
Drill Head Angle 90 Degree Fixed
Overall Dimensions 6-1/8″ Long x 2-3/4″ Wide x 11″ High
Net Weight 3.9 Pounds
Save This Manual
You will need this manual for the safety warnings and precautions, assembly, operating, inspection,
maintenance and cleaning procedures, parts list and assembly diagram. Keep your invoice with
this manual. Write the invoice number on the inside of the front cover. Write the product’s serial
number in the back of the manual near the assembly diagram, or write month and year of purchase
if product has no number. Keep this manual and invoice in a safe and dry place for future reference.
GENERAL SAFETY RULES
WARNING!
READ AND UNDERSTAND ALL INSTRUCTIONS
Failure to follow all instructions listed below may result in
electric shock, fire, and/or serious injury.
SAVE THESE INSTRUCTIONS
WORK AREA
1. Keep your work area clean and well lit. Cluttered benches and dark areas invite accidents.
2. Do not operate power tools in explosive atmospheres, such as in the presence of
flammable liquids, gases, or dust. Electrically powered tools create sparks which may
ignite the dust or fumes.
ELECTRICAL SAFETY
1. Grounded products must be plugged into an outlet properly installed and grounded
in accordance with all codes and ordinances. Never remove the grounding prong or
modify the plug in any way. Do not use any adapter plugs. Check with a qualified
electrician if you are in doubt as to whether the outlet is properly grounded. If the
product should electrically malfunction or break down, grounding provides a low resistance
path to carry electricity away from the user.
2. Double insulated products are equipped with a polarized plug (one blade is wider
than the other). This plug will fit in a polarized outlet only one way. If the plug does
not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified
electrician to install a polarized outlet. Do not change the plug in any way. Double
insulation eliminates the need for the three wire grounded power cord and grounded
power supply system.