Product manual

Page 5For technical questions, please call 1-800-444-3353.Submersible Pump
Maintenance
TO PREVENT SERIOUS INJURY FROM ACCIDENTAL OPERATION:
Unplug the Pump from its electrical outlet before performing any
inspection, maintenance, or cleaning procedures.
If the pump is moved during operation, flush it out with clean water after every use.
Quarterly Maintenance
The below maintenance must be performed at least once every 3 months under optimal conditions.
For frequent use, or dirty areas, more frequent maintenance is required.
1. Clean sludge and debris from the Base of the Pump.
2. Rinse the housing off with clean water.
3. Clean fibers from inside the pump housing
with a clean cloth, then store Pump in a dry
and clean location away from children.
4. If the pump housing cannot be cleaned from
the outside, it must be thoroughly cleaned.
Unplug the power cord before maintenance.
Dismantle the bottom part of the pump as follows:
a. Remove Screws and Base.
b. Rinse the impeller with clean water.
c. To prevent damage, do not rest the pump on
the impeller or pry against the impeller.
d. Reassemble in reverse order.