Product manual

SKU 94053 For technical questions please call 1-800-444-3353 PAGE 3
1. Maintain the label on the Pipe Clamp. This carries important information. If
unreadable or missing, contact Harbor Freight Tools for a replacement.
2. The Pipe Clamp is designed to work with all 3/4” NPT metal pipes (not
included). Do not attempt to subsitute a 3/4” NPT pipe with any other size or
type of pipe or any other object.
3. Stay alert. Watch what you are doing, and use common sense when
operating this product. Do not use this product while tired or under the
influence of drugs, alcohol, or medication. A moment of inattention while
operating this product may result in serious personal injury.
4. Store this product out of reach of children and other untrained persons.
Tools and equipment are dangerous in the hands of untrained users. Do not let
children handle or play with this product.
5. Maintain this product with care. Do not use this product if damaged. If
damaged, tag this product “Do not use” until repaired.
6. Use the right product for the job. Do not attempt to force a small tool or
accessory to do the work of a larger industrial tool or accessory. There are certain
applications for which this product was designed. It will do the job better and
more safely at the rate for which it was intended. Do not modify this product,
and do not use this product for a purpose for which it was not intended.
7. Always release tension on the Pipe Clamp and remove any workpieces
from the tool before performing maintenance or cleaning procedures.
8. Repair service must be performed only by qualified repair personnel.
Service or maintenance performed by unqualified personnel could result in a risk
of injury.
9. Always wear ANSI approved safety impact eye goggles when assembling
and operating this product.
10. WARNING! The warnings, precautions, and instructions discussed in this
manual cannot cover all possible conditions and situations that may occur. The
operator must understand that common sense and caution are factors, which
cannot be built into this product, but must be supplied by the operator.
GENERAL SAFETY PRECAUTIONS