Product manual

SKU 93458 For technical questions, please call 1-800-444-3353 PAGE 2
PRODUCT SPECIFICATIONS
Rivet Capacity 3/32”, 1/8”, 5/32”, & 3/16” sized pins
Operating Air Pressure 90 PSI
Air Consumption 4.5 CFM @ 90 PSI
Air Inlet Size 1/4”-18 NPT
Nosepiece Sizes 3/32”, 1/8”, 5/32”, 3/16”
SAVE THIS MANUAL
You will need this manual for the safety warnings and precautions, assembly,
operating, inspection, maintenance and cleaning procedures, parts list and assembly
diagram. Keep your invoice with this manual. Write the invoice number on the inside
of the front cover. Keep this manual and invoice in a safe and dry place for future refer-
ence.
UNPACKING
When unpacking, make sure that the item is intact and undamaged. If any parts
are missing or broken, please call Harbor Freight Tools at the number shown on the
cover of this manual as soon as possible.
SAFETY WARNINGS AND PRECAUTIONS
1. Use eye and hearing protection. Wear ANSI approved safety impact
goggles, hearing protection, and heavy-duty work gloves when using
this Riveter. Other people in the work area must also wear appropriate
ANSI approved safety equipment.
2. Keep work area clean. Cluttered areas invite accidents.
3. Stay within air pressure capacity. Do not operate the Riveter above 90 PSI.
4. Observe work area conditions. Keep work area well lit. Do not use pneumatic
tools in the presence of ammable gases or liquids.
5. Keep children away. Children must never be allowed in the work area. Do not let
them handle machines, tools, extension cords, or air hoses.
6. Store idle equipment. When not in use, tools must be stored in a dry location to
inhibit rust. Lock up tools and keep out of reach of children.
7. Use the right tool for the job. Do not attempt to force a small tool or attachment
to do the work of a larger industrial tool. There are certain applications for which
this tool was designed. It will do the job better and more safely at the rate for