Specifications Component Size Weight Capacity Top Compartment 26-1/2″ W x 18" L 40 lb Drawer A (x3) 6-1/2″ W x 14-3/8″ L x 2″ D 15 lb each Drawer B (x4) 22-1/4″ W x 14-3/8″ L x 2″ D 40 lb each Drawer C 22-1/4″ W x 14-3/8″ L x 3-1/8″ D 60 lb Total Combined Weight Capacity Empty Weight Page 2 305 lb 88 lb For technical questions, please call 1-888-866-5797.
IMPORTANT SAFETY INFORMATION Assembly Precautions 1. Assemble only according to these instructions. Improper assembly can create hazards. 5. Do not assemble when tired or when under the influence of alcohol, drugs or medication. 2. Wear ANSI-approved safety goggles and heavy-duty work gloves during assembly. 6. Weight capacity and other product capabilities apply to properly and completely assembled product only. 3. Keep assembly area clean and well lit. 7.
Assembly Instructions Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this document including all text under subheadings therein before set up or use of this product. 1. Assemble on a flat, level, hard and smooth surface capable of safely supporting a fully loaded Chest. 2. Locate the Keys, label them, then put them in a safe place. 3. Note: The Bottom Cabinet and Top Chest have different sets of keys. 4. Attach Handles (7) to both sides of the Chest using four Screw Sets (8). 5.
Operation Instructions Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this document including all text under subheadings therein before set up or use of this product. 1. Empty all Drawers. Note: Lid must be open for Drawers to be unlocked. 2. Close all Drawers and lock them. 3. If stacked on Bottom Cabinet, to prevent tipping, push/pull using supplied handle on Bottom Cabinet only. 4.
PLEASE READ THE FOLLOWING CAREFULLY THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM IN THIS DOCUMENT AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT.
Assembly Diagram 3 2 5 1 8 4 7 C A B 6 Part of Item 61609 For technical questions, please call 1-888-866-5797.
Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.
Specifications Component Size Weight Capacity Top Shelf 26-1/2″ W x 18″ L 305 lb Drawer A (x3) 22-1/4″ W x 16-1/4″ L x 2″ D 75 lb each Drawer B (x2) 22-1/4″ W x 16-1/4″ L x 3-1/4″ D 90 lb each Drawer C 22-1/4″ W x 16-1/4″ L x 4-1/4″ D 110 lb Drawer D (x2) 22-1/4″ W x 16-1/4″ L x 6″ D 120 lb each Total Combined Weight Capacity (Evenly distributed from bottom up.) Page 2 For technical questions, please call 1-888-866-5797.
IMPORTANT SAFETY INFORMATION Assembly Precautions 1. Assemble only according to these instructions. Improper assembly can create hazards. 5. Do not assemble when tired or when under the influence of alcohol, drugs or medication. 2. Wear ANSI-approved safety goggles and heavy-duty work gloves during assembly. 6. Weight capacity and other product capabilities apply to properly and completely assembled product only. 3. Keep assembly area clean and well lit. 7.
Assembly Instructions Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this document including all text under subheadings therein before set up or use of this product. 1. Assemble on a flat, level, hard and smooth surface capable of safely supporting a fully loaded Cabinet. 4. Attach two Locking Swivel Casters (9) to the same side as Handle using eight Caster Screw Sets (10). 2. Locate the Keys, label them, then put them in a safe place.
Operation Instructions Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this document including all text under subheadings therein before set up or use of this product. 1. Empty all Drawers. 2. Close all Drawers and lock them. 3. Unlock Swivel Casters. 4. To prevent tipping, move using supplied handle on Bottom Cabinet only. Roll Cabinet to a flat, level, hard and smooth surface capable of safely supporting a fully loaded Cabinet.
PLEASE READ THE FOLLOWING CAREFULLY THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM IN THIS DOCUMENT AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT.
Assembly Diagram 1 2 4 5 A B 3 C D D 8 7 Part of Item 61609 10 For technical questions, please call 1-888-866-5797.
Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.
