Product manual

Page 4 For technical questions, please call 1-888-866-5797. ITEM 62204
SAFETY OPERATION MAINTENANCESETUP
11� Proper cylinder care. Secure cylinders to a
cart, wall, or post, to prevent them from falling�
All cylinders should be used and stored in an
upright position� Never drop or strike a cylinder�
Do not use cylinders that have been dented�
Cylinder caps should be used when moving or
storing cylinders� Empty cylinders should be kept
in specified areas and clearly marked “empty�”
12� Never use oil or grease on any inlet connector,
outlet connector, or cylinder valves.
13� Use only supplied Torch on this Plasma Cutter.
Using components from other systems may cause
personal injury and damage components within�
14� WARNING: This product, when used for welding,
plasma cutting, soldering, or similar applications,
produces chemicals known to the State of
California to cause cancer and birth defects
or other reproductive harm� (California Health
& Safety Code § 25249�5, et seq.)
15� USE PROPER EXTENSION CORD. Make sure
your extension cord is in good condition� When
using an extension cord, be sure to use one heavy
enough to carry the current your product will draw�
An undersized cord will cause a drop in line
voltage resulting in loss of power and overheating�
A 50 foot extension cord must be at least
12 gauge in diameter, and an 100 foot extension
cord must be at least 10 gauge in diameter�
If in doubt, use the next heavier gauge� The
smaller the gauge number, the heavier the cord�
16� KEEP CHILDREN AWAY� All visitors should
be kept safe distance from work area�
17� MAKE WORKSHOP KID PROOF with padlocks,
master switches, or by removing starter keys�
18� USE RIGHT Plasma Cutter� Don’t force
Plasma Cutter or attachment to do a
job for which it was not designed�
19� SECURE WORK� Use clamps or a vise to hold
work� It’s safer than using your hand and it
frees both hands to operate Plasma Cutter�
20� MAINTAIN PLASMA CUTTER WITH CARE�
Keep Plasma Cutter clean for best and
safest performance�
Follow instructions for changing accessories�
21� Inspect before every use;
do not use if parts loose or damaged�
22� WARNING: The brass components of this product
contain lead, a chemical known to the State
of California to cause cancer and birth defects
or other reproductive harm� (California Health
& Safety Code § 25249�5, et seq.)
23� WARNING: The cord of this product
contains lead, a chemical known to the
State of California to cause cancer, and birth
defects or other reproductive harm� Wash
hands after handling� (California Health
& Safety Code § 25249�5, et seq.)
Symbology
Canadian Standards Association
Underwriters Laboratories, Inc�
VAC
Volts Alternating Current
A
Amperes