Product manual

Page 2 For technical questions, please call 1-888-866-5797. ITEM 62204
SAFETY OPERATION MAINTENANCESETUP
Table of Contents
Safety ��������������������������������������������������������� 2
Specifications ��������������������������������������������� 5
Setup ���������������������������������������������������������� 6
Operation ���������������������������������������������������� 8
Maintenance ���������������������������������������������� 12
Troubleshooting ����������������������������������������� 13
Circuit Diagram ������������������������������������������ 17
Parts List and Diagram ������������������������������ 22
Warranty ���������������������������������������������������� 24
WARNING SYMBOLS AND DEFINITIONS
This is the safety alert symbol� It is used to alert you to potential
personal injury hazards� Obey all safety messages that
follow this symbol to avoid possible injury or death�
Indicates a hazardous situation which, if not avoided,
will result in death or serious injury�
Indicates a hazardous situation which, if not avoided,
could result in death or serious injury�
Indicates a hazardous situation which, if not avoided,
could result in minor or moderate injury�
Addresses practices not related to personal injury�
IMPORTANT SAFETY INSTRUCTIONS
Read all safety warnings and instructions.
Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
1� DANGER! People with pacemakers should
not use this Plasma Cutter or be nearby
during use. Plasma Cutters, such as this one,
produce strong, fluctuating electromagnetic
fields that can cause pacemaker interference
or pacemaker failure. People with pacemakers
should consult their physician(s) for advice.
2� Maintain a safe working environment.
Keep the work area well lit� Make sure
there is adequate surrounding workspace�
Keep the work area free of obstructions, grease,
oil, trash, and other debris� Do not use in areas
near flammable chemicals, dusts, and vapors�
Do not use in a damp or wet location�
3� Never leave the Plasma Cutter unattended
when it is plugged into an electrical outlet.
Turn off the Plasma Cutter, and unplug it from its
electrical outlet before leaving�
Unplug the Plasma Cutter from its electrical
outlet before performing any inspection,
maintenance, or cleaning procedures,
including changing accessories.
4� Avoid unintentional starting. Make sure
switch is in off position before plugging in�
Make sure you are prepared to begin work
before turning on the Plasma Cutter�
5� Prevent eye injury and burns. Wearing personal
protective equipment reduces the risk of injury�
• Wear an ANSI‑approved welding helmet
featuring at least a number 10 shade lens rating�
• Leather leggings, fire resistant shoes or
boots should be worn when using this
product� Do not wear pants with cuffs, shirts
with open pockets, or any clothing that can
catch and hold molten metal or sparks�
• Keep clothing free of grease, oil, solvents,
or any flammable substances� Wear dry,
insulating gloves and protective clothing�
• Wear an approved head covering to protect
the head and neck� Use aprons, cape, sleeves,
shoulder covers, and bibs designed and
approved for welding and cutting procedures�
• When welding/cutting overhead or in
confined spaces, wear fi resistant ear plugs
or ear muffs to keep sparks out of ears�